Fast, Reliable Air Duct Cleaning Across Fresno
Air duct cleaning in Fresno, TX typically costs $280–$550 for a full residential system and is usually completed in 3–4 hours with same-day scheduling available. We’re Lone Star Air Duct Cleaning Service Houston, and our Air Duct Cleaning team makes the run down Highway 6 to Fresno regularly — usually arriving within 45 minutes of your call. If you’re in the 77545 ZIP or anywhere near Sienna Plantation Road, we’ve already worked on homes in your neighborhood.

Fresno’s not just another dot on our service map. After twenty years in this trade, we’ve learned that duct systems here tell a specific story — one written by Hurricane Harvey’s floodwaters, Fort Bend County’s rapid suburban build-out, and Gulf Coast humidity that never lets up. Scott Gray leads every job personally, and that matters when you’re dealing with flood-legacy contamination that franchise crews might miss entirely.
Call (855) 683-5929 for a free estimate. We’ll give you an honest assessment of what your system actually needs.
Why Lone Star Air Duct Cleaning Service Houston Is Fresno’s Preferred Air Duct Cleaning Company
Owner-led, every job. Scott Gray doesn’t dispatch employees — he’s the lead technician on your Fresno home, backed by two decades of hands-on experience diagnosing and cleaning real duct systems. That means the most experienced person in our company is the one opening your return-air box, not a rotating crew member learning on the job.
433 customers, 4.9 stars. Our review volume reflects a repeatable process, not lucky one-offs. Fresno homeowners specifically mention our thoroughness with post-flood systems and our willingness to show them video evidence of what we found.
We know the local housing stock. Fresno’s tract homes built between 1995 and 2015 — the bulk of the community — almost universally run flex-duct through unconditioned attics. We’ve cleaned hundreds of these systems. We know where the hangers sag, where the connections pull apart, and where Harvey’s water line still hides inside the plenum.
Professional-grade equipment on every truck. Rotobrush rotary brush systems, Nikro HEPA vacuums, and Abatement Technologies filtration — the same tools we use on commercial remediation jobs. No shortcuts, no rental equipment.
Our Air Duct Cleaning Services in Fresno
Residential Duct Cleaning
Fresno’s single-family homes — whether off FM 521 or near the Sienna Plantation border — share a common vulnerability: flex-duct systems baking in 130°F+ attics while pulling 70–90% humidity through every seam. Our residential cleaning addresses the full supply and return network, from the air handler to the farthest register. We pay special attention to the fiberglass lining inside flex duct, where mold colonizes faster here than in drier inland Texas cities. A typical Fresno home runs $280–$420 for complete residential duct cleaning.
Commercial Duct Cleaning
Fresno’s commercial growth along Highway 6 and near the Fort Bend County industrial corridor brings its own challenges. Retail and light industrial spaces here often use metal trunk lines with flex drops — systems that accumulate construction dust from ongoing area development plus the same humidity load as residential. We scale our Rotobrush and Nikro equipment to the job size, and Scott Gray personally inspects commercial systems for the corrosion patterns that high-humidity exposure accelerates. Commercial jobs in Fresno typically start at $450 and scale based on linear footage and access difficulty.
Supply Duct Cleaning
Supply lines push conditioned air into your living spaces — but in Fresno’s 1990s–2010s tract homes, they’re also where we find the most dramatic post-Harvey damage. Floodwater that entered return-air plenums often backed up into supply trunks, especially in homes with slab-on-grade construction common in western Fort Bend County. Our supply duct cleaning uses rotary brush agitation and negative-pressure HEPA extraction to remove sediment and biofilm without damaging the flex-duct membrane. Supply-only cleaning in Fresno runs $180–$290.
Return Duct Cleaning
This is where Fresno’s story gets specific. Return ducts pull air back to the handler — and in Harvey-flooded homes, they’re where the grey-black sediment line appears, marking the high-water mark inside the plenum. We prioritize return duct cleaning in Fresno because unremediated return systems actively recirculate mold spores through every room. Our process includes video inspection before and after, so you see exactly what was living in your air pathway. Return duct cleaning alone typically costs $220–$340 in the Fresno market.

Full System Cleaning
For homes with genuine flood legacy or visible mold concerns, we recommend full system cleaning — supply, return, trunk lines, plenums, and the air handler cabinet. This is our most thorough service, and it’s what we prescribe most often in Fresno’s Harvey-era subdivisions. We combine mechanical agitation, HEPA vacuum extraction, and antimicrobial treatment where indicated. Full system cleaning in Fresno ranges from $420–$550 for average-sized homes.
Video Inspection
We run a lighted borescope through your ductwork before any cleaning begins. In Fresno, this step isn’t optional — it’s how we document the flood line, identify flex-duct separations, and show you exactly why we’re recommending the scope we are. The video becomes your record of pre-existing conditions, especially valuable for insurance documentation or home sale disclosures. Video inspection is included with our full system and return duct services; standalone inspection runs $120–$180.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fresno
We maintain and install components from Honeywell, Aprilaire, and Guardsman — brands that hold up in Gulf Coast conditions. For Fresno homeowners dealing with humidity-related corrosion, we spec Aprilaire dehumidistat controls and Honeywell media filters that capture finer particulate than standard fiberglass throws. We stock common replacement parts locally, so if your duct access door has corroded through or your flex-duct connector has failed, we’re not ordering parts from Houston and making you wait. Our trucks carry Rotobrush and Nikro equipment plus Abatement Technologies HEPA systems — the same brands we use on remediation-grade jobs across Fort Bend County.
Common Air Duct Cleaning Problems We See in Fresno Homes
- Post-flood sediment and mold from Harvey’s 2017 floodwaters. In a subdivision near Fresno’s main thoroughfare, we found a 2005 flex-duct system with a return-air plenum still showing Harvey’s flood line. Using Rotobrush equipment and Abatement Technologies HEPA filtration, we removed the sediment and applied antimicrobial treatment, cutting mold spore counts by 95%. That grey-black line is still common in 77545 — and it means the duct system was never properly remediated.
- Flex-duct sagging and disconnecting in 130°F+ attics. Fresno’s summer attic temperatures exceed anything the original installers anticipated. Hangers pull loose from trusses, ducts belly downward, and moisture-laden air pools in the low spots. Every sag is a mold incubator in this humidity.
- Corrosion of galvanized duct connectors and access doors. Continuous 70–90% relative humidity attacks metal components that inland Texas cities never worry about. We replace corroded access doors with aluminum or stainless hardware that won’t fail again in two seasons.
- Mold colonization inside fiberglass duct lining. The combination of Gulf Coast humidity and Fresno’s extreme attic heat creates condensation cycles every time your AC cycles. Mold grows in the fiberglass pores where no homeowner can see it — until we show you with the borescope.
Pricing for Air Duct Cleaning in Fresno, TX
| Service | Typical Range in Fresno |
|---|---|
| Residential full system cleaning | $280–$420 |
| Return duct cleaning only | $220–$340 |
| Supply duct cleaning only | $180–$290 |
| Commercial duct cleaning | $450–$750+ |
| Full system with video inspection & antimicrobial | $420–$550 |
| Standalone video inspection | $120–$180 |
What moves you within these ranges? System size, accessibility (crawl space vs. attic), contamination severity, and whether we need to address flood-legacy mold. Homes with verified Harvey damage typically land in the upper third due to extended remediation time. We don’t quote by phone without asking these specifics — but we don’t charge to come look, either. Every estimate is free, and Scott Gray delivers it personally. Call (855) 683-5929 to schedule yours.
We Also Serve Cities Near Fresno
Our service radius covers the full southwest Houston corridor. We regularly work in Sienna Plantation — where newer construction brings its own duct challenges — Missouri City with its mix of vintage and modern housing stock, Manvel‘s rapid growth areas, and Stafford‘s commercial and residential blend. Same owner-led service, same equipment, same honest assessments. If you’re near any of these communities and seeing the same humidity and flood-legacy issues, we’re already in your area.
Serving Fresno, TX — Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Air Duct Cleaning in Fresno
Look for a grey-black sediment line inside your return-air plenum or visible water staining on duct insulation — the most reliable indicator that floodwater entered your system and was never properly remediated. In Fresno’s 77545 ZIP, we routinely open return-air boxes and find this exact mark. If your home was built between 1995 and 2015 and sits on slab construction, the risk is elevated. Call (855) 683-5929 and we’ll run a video inspection to confirm what you’re dealing with — estimates are free.
Fresno’s Gulf Coast subtropical climate keeps relative humidity between 70–90% year-round, and summer attic temperatures regularly exceed 130–140°F, creating severe condensation cycles that accelerate mold colonization inside flex-duct fiberglass lining far faster than in drier inland Texas cities. The post-Harvey flood legacy layered on top means many systems are recirculating mold spores that drier regions simply don’t face. Cleaning here isn’t maintenance — it’s mitigation. Call (855) 683-5929 for an assessment of your system’s condition.
We use Rotobrush rotary brush systems for mechanical agitation, Nikro HEPA vacuums for negative-pressure extraction, and Abatement Technologies filtration for containment — the same professional-grade equipment used on commercial and remediation-grade jobs. Scott Gray selected this roster specifically for the contamination profiles we encounter in Fort Bend County’s flood-legacy homes. These aren’t rental units or consumer-grade tools. Call (855) 683-5929 if you want to know exactly what’ll be running in your home.
Video inspection is included with our full system cleaning and return duct cleaning services; standalone inspection for diagnostic or documentation purposes runs $120–$180. In Fresno, we consider the borescope essential — it’s how we document Harvey flood lines, identify flex-duct separations, and show you exactly what we’re addressing. The video becomes your record for insurance or home sale purposes. Call (855) 683-5929 to schedule an inspection with Scott Gray.
We apply antimicrobial treatment only where visual or lab-confirmed mold is present, using EPA-registered products appropriate for HVAC systems — never a blanket fogging of chemicals through clean ductwork. In Fresno’s flood-legacy homes, we target the treated area to the specific plenum or duct section showing contamination, following mechanical removal of sediment with our Rotobrush and HEPA systems. We don’t sell fear, and we don’t sell unnecessary chemicals. Call (855) 683-5929 and we’ll show you exactly what your system needs.
Ready to see what’s inside your ducts? Scott Gray will personally inspect your Fresno home’s system, show you the video evidence, and give you an honest scope of work with upfront pricing. No franchise crew, no rotating technicians — just two decades of hands-on experience and the equipment to do the job completely. Call (855) 683-5929 for your free estimate today.
Written by Scott Gray, Owner at Lone Star Air Duct Cleaning Service Houston, serving Fresno and Fort Bend County since 2004.